Manual Guide for Honda 250EX Valve Adjustment

Manual Guide for Honda 250EX Valve Adjustment
Manual Guide for Honda 250EX Valve Adjustment

Machine can certainly have some problems so the owners need to be aware of it. If you are the owners of Honda 250EX valve, you may find certain problem relating to the machine. It can be the valve adjustment that it takes rather difficult, especially for the first time. If you hate such matter, this article will talk about Honda 250EX valve adjustment and anything you need to know about it. We have found the same Honda 250EX valve adjustment problem in some forums discussing about the topic. Here we will give the summary about some of the discussions.

Some Information to Know about Honda 250EX

It is an interesting topic indeed, because Honda 250EX valve adjustment is exposed and shared from various experience. The subject of Honda 250EX clearance valve adjustment appears due to one of the users. Exactly it is Honda Recon 2000 that has been bought several months ago. The sound seems louder than what it should be. Besides, there is also Honda Recon ES 2003 that has been bought which is more power and much quieter. Definitely there is more power difference than it should be. The valves of 2000 are actually not opening and it can cause decreased air flow followed by decreased power.

Considering Honda 250EX valve adjustment, it is difficult if one doesn’t familiar and know much about the Recon. For the 2000 Recon, the assumed valve is around 2 or 4 ohc head. Indeed, it should be about 2 or 4 covers of valve coming off. In this Honda 250EX valve adjustment case, you need to own a feeler gauge to function for this. You need to get the definite clearance for your bike from the manual of owner while the gauge used should move between the valve’s cover top and the screw for adjustment with certain friction. If you suppose such friction is proper, utilize a pillar pair for holding the screw square tip (make sure that it doesn’t shift). You can utilize a wrench to adjust the nut into rocker arm for securing the screw for adjustment.

MUST READ :  The Importance of Carburetor on a Honda 250EX Diagram for Maintenance

Tips for Adjusting Honda 250EX Valve

In doing Honda 250EX valve adjustment, it is important not to have fear in doing the work and consider wrench needed in doing the job. Commonly, some special tools which have never been used such as lock socket for a front hub in 4WD F150 is required.

About the manual for Honda 250EX valve adjustment the specs should be match for it. You can make sure that you have got a set of filler gauge and then remove the Ex valve and intake caps. You can move to the flywheel part to remove the cap of inspection and the flywheel cap of screw driver by using a socket having 17 mm of size. Rotate the piston to top dead center or TDC on the stroke and make sure that you are in the stroke.

After doing some steps above for Honda 250EX valve adjustment, you can turn that flywheel backwards. Loosen the nut (10 mm) on the Ex and intake valves by using filler gauge. Insert I between the top part of valve spring and round valve and tighten down the nut. All of the steps should be done in cold engine condition.

Description: Honda 250EX valve adjustment is really important because it relates to how engine can be operated because it controls open or close gases or liquid flows in the engine.


Please enter your comment!
Please enter your name here